Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Quad Auto Gate Dynamic Processor
Model: DN514 Plus
- Four frequency-conscious high performance gates in one single unit of rack space
- Optimised for fast set up and dependable triggering for every conventional gate application
- With two semi-automatic Attack Modes and hold time automatically scaled to release value, the DN514 Plus combines outstanding dynamic performance with simplified control
- Unique sync function synchronises harmony parts, brass section, etc., by interlocking all four gate release times
- Advanced VCA design for low noise and distortion
Product Info
Tech Specs
Related Products
Documents
Quad auto gate dynamic processor. Two channels of full function compression, expansion, limiting and peak clipping in one unit of rack space. one of the industry standard multi-gate devices for both recording and live applications. Providing the same superb audio performance as its other 500 Plus - series, DN514 Plus packs four channels of frequency conscious gating into just 1RU. This provides a significant operational advantage, being able to tailor the operation of each gate to a specific frequency range.
- Four frequency-conscious high performance gates in one single unit of rack space
- Optimised for fast set up and dependable triggering for every conventional gate application
- With two semi-automatic Attack Modes and hold time automatically scaled to release value, the DN514 Plus combines outstanding dynamic performance with simplified control
- Unique sync function synchronises harmony parts, brass section, etc., by interlocking all four gate release times
- Advanced VCA design for low noise and distortion
- Additional key inputs for each channel allows triggering from external sources
- Side chain monitor function simplifies filter set-up
- Threshold and release LED’s provide visual information regarding gate status. Release contour indicated by release LED
- Both Master and channel bypass switches are provided to aid set-up
- Width: 482mm (19 inch)
- Depth: 292mm (11.5 inch)
- Height:
44.5mm (1.75 inch)
- Inputs: Four
- Input Type: Electronically balanced (pin 3 hot)
- Input Impedance: 20kohms balanced
- Key Inputs: Four
- Key Input Type: Electronically balanced (tip hot)
- Key Input Impedance: (ohms)
- Balanced: 20 and 10 kohms
- Audio Outputs: Four
- Audio Output Type: Unbalanced (pin 3 hot)
- Minimum Load Impedance: 600 ohms
- Source Impedance: <60 ohms
- Maximum Level: +21 dBu
- Frequency response (20Hz-20kHz): ± 0.5dB
- Distortion (at + 4dBu): <0.03% at 1kHz
- Noise floor (20Hz-20kHz unweighted): -100 dBu
- Gate closed: <-94 dBu
- Gate open: < -100 dB
- Attack programme: Related semi-automatic 50us to 200us "fast" 500us to 2ms "slow"
- Hold/Release Variable: 40ms to 2sec
- Threshold Variable: -40 to +20 dBu
- Attenuation: >84dB Gate closed
- High Pass Filter: 20Hz to 5kHz/12dB octave
- Low Pass Filter: 80Hz to 20kHz/12dB octave
- Audio Inputs/Outputs: 3 pin XLR
- Power: IEC
- Consumption: <30 VA
- Sampling Rate/Frequency: 20 kHz
- Sampling Rate/Frequency: 20 Hz
- Sampling Rate/Frequency: 0 Ghz
- Input Impedance: 20000 ohm
- Output Impedance: 600 ohm
- Depth: 11.50 in
- Height: 1.75 in
- Width: 18.98 in
- Product Weight: 8.82 lbs
- Shipping Weight: 13.23 lbs
DN100
- Direct Injection Box with Ground-up Redesign
DN360
- Analogue Graphic Equalizer with Earth Lift Switch Enables Signal and Chassis Grounds
DN370
- Professional Graphic Equaliser with Long-throw 45mm Oil-damped Faders
DN500 Plus
- Professional Graphic Equaliser with Long-throw 45mm Oil-damped Faders
DN504 Plus
- Quad Compressor/Limiter with Switchable Knee Function
DN9331 Rapide
- Tactile Graphic Equalizer Controller with High-speed Motorised Faders
DN9696
- Hi-res Audio Recorder with Simple Transport Controls
DN9848E
- Digital System Controller with 4 Inputs and 8 Outputs
Show Command
- Hardware and Software Audio Equalization Integrated System
Klark Teknik - Full Line Brochure.pdf
4559 kb
- Brochure
Request Quote
Suggested Products
by
RDL, Radio Design Labs
Thank you!
Someone will be in touch with you shortly.
Contact Code3AV Inc.
close
Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/
Contact in regards to this product:
Klark Teknik
Model: DN514 Plus
Request more information from a dealer near you
close
Request more information from a dealer near you