Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Professional Graphic Equaliser with Long-throw 45mm Oil-damped Faders
Model: DN370
- Long-throw 45mm oil-damped faders with dust cover for increased accuracy and resolution
- All-new proportional-Q filters provide optimum control without undesirable audio artifacts
- Gain control with +6dB/-infinity range and centre detent at unity gain. Allows effective muting of channel in emergencies
- Range switch selects ±6dB or ±12dB operation for the faders, with LED indication
- Channel bypass switch with LED indication. The unit also provides automatic relay bypass in the event of power failure
Product Info
Tech Specs
Related Products
Documents
Professional graphic equaliser with long-throw 45mm oil-damped faders with dust cover for increased accuracy and resolution. Sweepable high-pass filter with 20Hz to 500Hz range sets the lower frequency limit of the system. The control incorporates a push switch to select the filter in and out, with an illuminated ring for "at a glance" status indication. Invaluable for smooth rejection of unwanted subsonic and low frequencies, particularly relevant with modern, compact wedge monitors. Sweepable low-pass filter with 2kHz to 20kHz range sets the upper frequency limit of the system. The control incorporates a push switch to select the filter in and out, with an illuminated ring for at a glance status indication. Provides optimum bandwidth control for vocal monitors and IEM systems. Two sweepable notch filters per channel, with overlapping frequency ranges of 20Hz to 2kHz and 200Hz to 20kHz. These allow precise removal of problem frequencies with minimal effect on the rest of the program material, and fast control of between fader frequencies. This gives precise control of room and loudspeaker resonance/feedback nodes with minimum loss of energy even between ISO centres. The controls each incorporate a push switch to select the filter in and out, with an illuminated ring for "at a glance" status indication.
- Long-throw 45mm oil-damped faders with dust cover for increased accuracy and resolution
- All-new proportional-Q filters provide optimum control without undesirable audio artifacts
- Gain control with +6dB/-infinity range and centre detent at unity gain. Allows effective muting of channel in emergencies
- Range switch selects ±6dB or ±12dB operation for the faders, with LED indication
- Channel bypass switch with LED indication. The unit also provides automatic relay bypass in the event of power failure
- Bypass switch with status LEDs for quick comparison of applied EQ
- Power switch, fully recessed in the on position to avoid accidental operation
- Signal present LEDs show the presence of audio signals above -40dBu
- IEC mains inlet, the unit automatically adjusts for operation on all voltages from 100 to 240V AC
- KT logo for quality engineering and reliability 3-year KT warranty for peace of mind
- Equalizer Type - Graphic Equalizer
- Height: 133mm (5.25 inch) (3U High)
- Width: 482mm (19 inch)
- Depth:
205mm (8 inch)
- Product Weight: 12.79 lbs
- Shipping Weight: 15.43 lbs
- Depth: 8 in
- Height: 5.25 in
- Width: 19 in
- Impedance: 20,000 ohm
- Impedance: 20 k?
- Input two type: Electronically balanced (pin 2 hot)
- Maximum Input Level: +22 dBu
- Outputs Two type: Electronically balanced (pin 2 hot)
- Minimum Load Impedance: 600 ohms
- Source Impedance: <60 ohms
- Maximum Level: +22 dBu
- Frequency Response: 1kHz ±0.5 dBu 20Hz-20kHz
- Eq Out: ±0.5 dB
- EQ In: (flat) ±0.5 dB
- Distortion (THD+N): <0.003% at 1kHz,+4dBu
- Dynamic Range: >114 dB (20Hz to 20kHz unweighted, ±12dB range)
- Overload Indicator: +20 dBu
- Gain: -infinitive to +6 dB
- Equalisation: 30 Bands
- Centre frequencies: To BS EN ISO 266:1997 25Hz to 20kHz, 1/3 octave tolerance ±5%
- Maximum Boost/Cut: ±6/12 dB
- High Pass Filter Slope: 12 dB/Octave
- Low Pass Filter Slope: 12 dB/Octave
- Notch Filter Attenuation: >17 dB
- Q: 32
DN100
- Direct Injection Box with Ground-up Redesign
DN360
- Analogue Graphic Equalizer with Earth Lift Switch Enables Signal and Chassis Grounds
DN500 Plus
- Professional Graphic Equaliser with Long-throw 45mm Oil-damped Faders
DN504 Plus
- Quad Compressor/Limiter with Switchable Knee Function
DN514 Plus
- Quad Auto Gate Dynamic Processor
DN9331 Rapide
- Tactile Graphic Equalizer Controller with High-speed Motorised Faders
DN9696
- Hi-res Audio Recorder with Simple Transport Controls
DN9848E
- Digital System Controller with 4 Inputs and 8 Outputs
Show Command
- Hardware and Software Audio Equalization Integrated System
Klark Teknik - Full Line Brochure.pdf
4559 kb
- Brochure
Klark Teknik - DN370 Brochure.pdf
1798 kb
- Brochure
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Code3AV Inc.
close
Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/
Contact in regards to this product:
Klark Teknik
Model: DN370
Request more information from a dealer near you
close
Request more information from a dealer near you