Digi-Loop DSP Dual Channel Loop Amplifier - Next Generation

Model: DL210 NET D 2.0

Network control - allows control and calibration of unit remotely with application software
High continuous current 12 Arms (17 Apk) per output continuous
LCD Screen with VU metering, easy one-button menu control
DSP Audio Processing
Dante™ Input

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Videos

Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency.

The Digi-Loop’s amplifier design offers dual 12 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users.

System includes: (1) DL 210 NET D 2.0 Loop Amplifier, (1) WLC 004 Line Cord (US) & (1) IDP 009 ADA Wall Plaque (t-coil)

Network control - allows control and calibration of unit remotely with application software
High continuous current 12 Arms (17 Apk) per output continuous
LCD Screen with VU metering, easy one-button menu control
DSP Audio Processing
Dante™ Input
USB for firmware updates
Input mixing, parametric equalization, compression, metal compensation, high and low-pass filters, AGC and audio delay
Power-save mode
Adjustable output delay for multiple amps in large venues
Fault warning and active protection against shorted or open circuits and overheating
Loop fault relay output
XLR and 3-position terminal block input configurable as microphone input or line-input, balanced or unbalanced.
Standard 2 RU, 19” rackmount
Magnetic signal couples directly to devices equipped with telecoils (T-coils) such as hearing aids, cochlear implants, or optional loop receivers.
Suitable for phased-array or dual-loop systems.
Phased-array mode automatically produces 90° phase shift in slave loop output
Meets IEC 60118-4 system performance requirements when integrated into a correctly designed and installed system.
Test specification provided to IEC 62489-1 standard.
Meets ADA / ADAAG guidelines.

Dante Enabled - Yes
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Certifications: CE, UL, ULC, FCC, Industry Canada, WEEE, CB scheme, RCM
Depth: 12 in
Height: 3.50 in
Width: 19 in
Product Weight: 14.30 lbs
Operating Temperature (Maximum): 95 F
Operating Temperature (Minimum): 32 F
Warranty (Length/Type): 2 years
General:
Color: Case: Black, white and blue legends on front, white legends on back. LCD: Backlit Blue.
Fan cooling: Variable Speed, Temperature Controlled
Power supply: Internal, Universal 100-240 VAC, 50/60 Hz, 250 Watt. Fuse: 5 x 20 mm, 5 A, 250 V. AC power plug is IEC 320-C14.
Heat output @ 120 VAC: Sleep state: 100 BTU/hr; Idle state: 146 BTU/hr; Driving two loops @ 12 A each: 1,040 BTU/hr
Ethernet: (1x) RJ-45; 10-100 MBps.
USB: (1x) standard-B. USB 1.1, 2.0 or 3.0 supported.
RS-232/Loop fault relay: (1x) DB-9 jack. RS-232: Pin 2=Tx, Pin 3=Rx, Pin 5=gnd. Loop fault relay: Pin 1=NC, Pin 4=Common, Pin 6=NO. Relay contact rating: 2.0 A @ 30 VDC.
Coverage area*: 31,400 sq. ft. (2,917 sq. m.) (Perimeter Loop, 1:1 aspect ratio, both outputs driven); 51,660 sq. ft. (4,800 sq. m.) (Perimeter Loop, 3:1 aspect ratio, both outputs driven)
Inputs:
Dante input: DL210 NET D 2.0 model only. (1x) RJ-45;100 Mbps. Minimum latency: 2 ms. Audio sample rates supported: 44.1, 48 kHz. Resolution: 24 bits.
Mic/Line inputs: (2x) 3-position terminal block, input impedance=1.5 k ohm Mic, 10 k ohm Line. Configurable/Accepts: Mic, Line -10 dBV, Line +4 dBu, or Line +8 dBu, balanced or unbalanced. Phantom supply (48V).
70-100 V input: (1x) 2-position terminal block; high/speaker-level input (accepts 25 V, 70 V or 100 V) from distributed audio/paging systems.
Outputs:
Line outputs: (1x) 3-position terminal block; loop-through of Mic/Line Input 1 & Line Input 2, +4 dBu, Balanced or Unbalanced. The line outputs mirror the audio of the loop output.
Loop output(s): (1x) 2-position terminal block per output
Audio output delay: Adjustable from 0 to 165 msec
Headphone output: (1x) 1/4” stereo headphone jack, on front of unit. Monitored input or output selectable in menu.
Loop fault relay: Integrated into RS-232 DB-9 jack. Pin 1=NC, Pin 4=Common and Pin 6=NO. Contact rating: 2.0 A @ 30 VDC.
Loop output drive voltage: 33.3 Vrms (47.1 Vpk) continuous
Rated loop output current*: 12 Arms (17 Apk) per output
Loop resistance range: 0.5 ohm to 3.0 ohm (DC)
Speaker output: Integrated into Loop Output A terminal block (switchable in menu). 225 Watts x 1 channel @ 4ohm, 125 Watts x 1 channel @ 8O, (Class D).
Frequency response = 20 Hz-20 kHz, THD=0.07%.
Audio:
Rated load*: 0.5 ohm DC with 135 µH inductance
Loop frequency response: 45 Hz to 9.0 kHz ± 2 dB (1 kHz ref.)
Rated loop THD*: <1 % at rated output current (1 kHz sine wave).
Other:
Front controls: Front LCD display menu access/adjustment via control button/dial.
Adjustable settings: Input mixing, parametric equalization, compression, metal loss compensation, high and low-pass filters, AGC and audio delay, output levels. See User Manual for adjustment range(s).
Internal calibration tools: Test tone generator with pink noise, loop current adjustment/matching. See User Manual for details.
Other features: Save/load configuration, loop test, priority input selection with adjustable threshold, loop fault relay, open/short and thermal protection. See User Manual for details.
Network control & firmware: Function control and calibration by DigiLoop PC App via ethernet (RJ-45). PC App requires Windows 7 or higher. Firmware updates through USB only.
Standards compliance: This product is designed to meet the IEC-60118-4 standard when correctly designed, installed and commissioned. Test Specifications provided to the IEC 62489-1 standard.

MCAT-232G-DL210-20.pdf 521806 kb - Data Sheet

Project List

BROM-062-loop2021.pdf 1594324 kb - Brochure

Project List

MAN-202M-PLA-DL107-207-210-2023-1.pdf 4653171 kb - Instructions

Project List

Williams Sound: Digi-Loop

Project List

Digi-Loop Amplifiers

Project List