10" 2-way Full Range Loudspeaker for Portable PA and Installation Applications
Model: NuQ102
- Ideal for FOH, side fill and monitor applications
- 10" low frequency driver with low mass voice coil for improved transient response
- Aluminium dome 1" neodymium motor compression driver
- Switchable passive/bi-amp operation for flexibility of use
- Rotatable converging elliptical waveguide provides 100° H x 60° V dispersion
The 2 way full range NuQ102 is a switchable passive/bi-amp 1,200 Watt 10" loudspeaker system ideally suited for a wide range of speech and music sound reinforcement applications. Engineered to work in conjunction with TURBOSOUND loudspeaker management systems, the NuQ102 provides optimal performance for FOH, sidefi ll and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications.
The NuQ102 loudspeaker features a 10" low frequency driver with a low mass voice coil for improved transient response, and an aluminium dome 1" neodymium high frequency compression driver mounted on a rotatable 100° horizontal by 60° vertical dispersion converging elliptical wave guide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch. The rear panel connector plate carries Neutrik speakON NL4 connectors for input and link connections to additional enclosures.
Finished in a highly durable semi matt black paint, the cabinet is constructed from 12mm (1/2") birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Multiple threaded rigging points are provided for suspension in any orientation, or for mounting with industry standard wall brackets. Optional flying yoke, swivel brackets, and swivel extenders allow for further flexibility in install applications. The NuQ102 also features a 35 mm socket for standard pole mounting – plus integrated handles for convenient transport.
- Ideal for FOH, side fill and monitor applications
- 10" low frequency driver with low mass voice coil for improved transient response
- Aluminium dome 1" neodymium motor compression driver
- Switchable passive/bi-amp operation for flexibility of use
- Rotatable converging elliptical waveguide provides 100° H x 60° V dispersion
- 12mm (1/2") birch plywood enclosure with hard wearing semi matt black paint finish
- Rugged powder coated perforated steel mesh grille
- Integral 35 mm pole mount and handles
- Multiple internal rigging points allow bracket mount and suspension in any orientation
- Neutrik speakON NL4 connectors for reliable long life operation
- Horizontal Symmetry - Yes
- Loudspeaker Mount Type - Pole (Stand Speakers)
- Vertical Symmetry - Yes
- Warranty - Yes
- Loudspeaker Setup - Portable
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 10 in
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 50 Hz
- Coverage Horizontal: 100 degrees
- Coverage Vertical: 60 degrees
- Impedance: 8 ohm
- Maximum SPL (Sound Pressure Level): 93 dB
- Power Handling: 1200 Watt
- Sensitivity: 93 dB
- Depth: 10.16 in
- Height: 20.67 in
- Width: 12.52 in
- Warranty (Length/Type): 3 Years
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Construction: 12mm Birch Plywood, Powder-coated Perforated Steel
- Impedance (High Frequency): 6 ohm
- Impedance (Low Frequency): 8 ohm
- Power Handling (High Frequency): 30 Watt
- Power Handling (Low Frequency): 300 Watt
- Product Weight: 27.90 lbs
- Color: Black
Suggested Products
Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/