Single Channel Digital Wireless Receiver with 902 to 928 MHz Frequency Range

Series: Shure

Model: ULXD4=-X52

Predictive switching diversity
High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
Interference detection and alerts provided on both the receiver and Wireless Workbench® 6
Front panel gain adjustment buttons provide up to 60 dB additional gain

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ULXD4 is an intelligent single-channel digital wireless receiver for use with ULX-D transmitters in demanding corporate, education, and performance environments. With an expansive set of professional features, including 24-bit / 48 kHz digital audio quality, efficient and intelligent RF performance, and AES 256-bit encryption, the ULXD4 provides a 64 MHz tuning range (region dependent), extensive antenna and spectrum options to provide uncompromising wireless tailored for professional sound reinforcement.

Predictive switching diversity
High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
Intelligent scanning automatically finds and deploys the cleanest frequencies to transmitters over IR sync
Interference detection and alerts provided on both the receiver and Wireless Workbench® 6
Front panel gain adjustment buttons provide up to 60 dB additional gain
AES 256-bit encryption-enabled for applications where secure transmission is needed
Ethernet networking provides streamlined setup across multiple receivers, Wireless Workbench® 6 integration, and AMX/Crestron control
Support for frequency coordination with the Axient® Spectrum Manager
Yamaha® device ID allows simplified channel patching on CL consoles
Rugged metal chassis
Intuitive front panel LCD menu and controls with lockout feature
Upgraded LCD with adjustable contrast and brightness
Audio and RF LED meters with peak indicator
Remoteable 1/2 wave antennas
Furnished rack hardware

Energy Star rated - Yes
Enviro-Packaging Policy - Yes
EPEAT Evaluation - Yes
Spec Sheet available - Yes
Spec Sheet available - Yes

Transmission Range: 330 ft
Current Draw: 0.60 Amps
DC Voltage: 15 Volts
Depth: 18.40 in
Height: 3.70 in
Width: 14.50 in
Product Weight: 2.84 lbs
Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): -0.40 F
Certifications: CE
Input Impedance (Audio): 50 ohm
Output Impedance (Audio): 100 ohm
Shipping Depth (with packaging): 18.75 in
Shipping Height (with packaging): 8.50 in
Shipping Width (with packaging): 15.50 in
Shipping Weight: 13 lbs
Housing: Steel, Extruded Aluminum
Audio Output::
Gain Adjustment Range: -18 to +42 dB in 1 dB steps (plus Mute setting)
Configuration: 1/4” (6.35 mm): Impedance balanced (Tip = audio, Ring = no audio, Sleeve = ground), XLR: Balanced (1=ground, 2=audio +, 3=audio -)
Impedance: 1/4” (6.35 mm): 100 Ohm (50 Ohm Unbalanced), XLR: 100 Ohm
Full Scale Output: 1/4” (6.35 mm): +12 dBV, XLR: LINE setting = +18 dBV, MIC setting = -12 dBV
Mic/Line Switch: 30 dB pad
Phantom Power Protection: 1/4” (6.35 mm): Yes, XLR: Yes
NETWORKING::
Power over Ethernet (POE): No, protected
Network Interface: Single Port Ethernet 10/100 Mbps
Network Addressing Capability: DHCP or Manual IP address
Maximum Cable Length: 100 m (328 ft)
RF INPUT::
Spurious Rejection: >80 dB, typical
connector type: BNC
Impedance: 50 ohm
Bias Voltage: 12 to 13 V DC, 170 mA maximum, per antenna

Digital Wireless Receiver 2898 kb - Data Sheet

Project List

Receiver 910296 kb - Data Sheet

Project List

Receiver 2094867 kb - Instructions

Project List

Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990

Contact in regards to this product:

Shure Incorporated

Model: ULXD4=-X52