2RU, 32 Pushbutton Keys
Model: KP-5032PB
- Backward compatible with older technologies such as analog audio in USOC and 568-B connector formats
- All previous options hardware connectors (RC, GPI, and ancillary items) are now standard
- New wide-angle high-definition display
- Enhanced navigation menus optimized for ease of use
- Front panel headset connector is field-swappable, making it simple to change the default 5-pin XLR (6-pin compatible) headset connector with a 4-pin XLR headset connector, as needed
The KP-5032 and KP-5032PB keypanels deliver superior high-quality digital audio using the Bosch-branded OMNEO technology with Dante? by Audinate audio over IP via either copper or fiber. The KP-5032 models deliver top-notch audio, free of noise, delay, and other artifacts present in older technology. This family of keypanels includes a rich set of connectors as standard, including GPIO and RC. As with other RTS products, emphasis has been placed on backward compatibility with previous generations of matrices including analog technology. The KP-5032 keypanels utilize the latest generation of wide angle TFT displays providing superior clarity, resolution, and longer display life, delivering high-quality readability under a variety of lighting conditions.
- Backward compatible with older technologies such as analog audio in USOC and 568-B connector formats
- All previous options hardware connectors (RC, GPI, and ancillary items) are now standard
- New wide-angle high-definition display
- Enhanced navigation menus optimized for ease of use
- Front panel headset connector is field-swappable, making it simple to change the default 5-pin XLR (6-pin compatible) headset connector with a 4-pin XLR headset connector, as needed
- UL Rated
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Certifications: CE, UL
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 13 Watt
- Peak Power: 18 Watt
- Depth: 3.88 in
- Height: 3.46 in
- Width: 17.39 in
- LCD Display:
•Active Area: 120.10mm (wide) x 35.86mm (high)
•Dot Resolution: 576 x 172 pixels
•Color Resolution: 16-bit (64K)RGB color
•View Angle: 80 degrees (typical; all directions)
•Type (relays): SPDT
•Contact Rating: 1AMP at 30VDC - Inputs:
•Type: Optically Coupled
•Input Voltage: 5-18 VDC on A+, A+ is internally pulled to 5VDC. Connect K- to to activate - Outputs:
•Type (relays): SPDT
•Contact Rating: 1AMP at 30VDC - Inputs Matrix:
•Type: Balanced
•Typical Input Level: +8dBu
•Typical Input Impedance: >10kOHMS
•Maximum Input Level: +20dBu
•Supported Bandwidth: 100Hz to 20KHz - Aux 1 and Aux 2:
•Type: Balanced
•Typical Input Level: +8dBu
•Typical Input Impedance: >10 k OHMS
•Front Panel Mic
•Type: Electret
•Typical Input Level: -42dBu
•Typical Input Impedance: 1kOHMS
•Maximum Input Level: -25dBu - Rear Panel Mic:
•Type: Electret
•Typical Input Level: -42dBu
•Typical Input Impedance: 1kOHMS
•Maximum Input Level: -25dBu
•Front and Rear Headset Mic - Electret
•Typical Input Level: -42dBu
•Typical Input Impedance: 1kOHMS
•Maximum Input Level: -25dBu
•Front and Rear Headset Mic - Dynamic
•Typical Input Level: -50dBu
•Typical Input Impedance: 600OHMS
•Maximum Input Level: -25dBu - Outputs Matrix:
•Type: Balanced
•Typical Output Level: +8dBu
•THD+N%: <0.20%
•Typical Output Impedance: 600OHMS
•Maximum Output Level: +20dBu
•Frequency Response: 100Hz to 20KHz - MIC/LINE Out:
•Type: Balanced
•Typical Output Level: +8dBu
•THD+N%: <0.20%
•Typical Output Impedance: 600OHMS
•Maximum Output Level: +20dBu
•Frequency Response: 100Hz to 20KHz
•Headset - Front, Rear, Left, Right - Maximum:
•Output Power: 125mW for 32OHMS load
•Earphone Impedance: 16OHMS and above
•THD+N%: <0.20%
•Frequency Response: 100Hz to 20KHz - Speaker - Rear:
•Maximum Output Power: 5W for 8W load
•Speaker Impedance: 4OHMS and 8OHMS
•THD+N%: <0.20%
•Frequency Response: 100Hz to 20KHz - Speaker - Front:
•SPL: 84dBSPL for 1kHz sine wave at 1m - Digital OMNEO Channels :
•Typical OMNEO Latency: 1ms
•Frequency Response: 20Hz - 20KHz - Weight: KP-5032: 4.89lb (2.22kg), Power Supply: 0.53lb (.24kg), Mounting Bracket: 0.30lbs (.14kg)
Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/