10" 22.5° Modular Point Source Line Array
Model: VA/VAX101i-22
- Available in fully modular design enables cabinets to be easily configured as flown vertical arrays
- With a range of vertical and horizontal dispersion angles
- Highly configurable enclosures and ingenious hardware make it easy to custom design an array for every application
- Array modules are built around a high power 10" low frequency woofer coupled with either one or two neodymium high frequency compression drivers
- 22.5° cabinets are fixed curvature and must be tight pack arrayed
7.5° VARIAi cabinets employ concealed flying hardware to hang and array like traditional line arrays, 15° and 22.5° cabinets are fixed curvature and must be tight pack arrayed.
VA101i cabinets are self-powered with integral PF2-500R DSP and CobraNet enabled amp modules. VAX101i enclosures require external amplification and DSP processing.
The VA101i-22 is designed using a single 10-inch low frequency woofer and two 1-inch high frequency compression drivers. Available in 60°, 90° and 120° standard configurations, as well as with 60°/90° and 90/120° transitional WaveGuide options. The VA101i-22 is arrayable at 22. 5° steps.
The VAX101i-22 is a passive version of the same system.
VARIAi modular installation array systems are designed to be the most flexible and versatile loudspeakers available. Highly configurable enclosures and ingenuous hardware make it easy to tailor each speaker to every application.
Integrating only the highest quality components, VARIAi employs powerful low-frequency woofers and lightweight neodymium Compression Drivers, all coupled to the most advanced cabinet and waveguide designs. The result is a system that delivers the sound and performance you’ve come to expect from Renkus-Heinz.
EASE Focus II Simulation Software
VARIA101i DLL data in EASE and EASE Focus II simulation software tools allows users and system designers to quickly and accurately predict the response of the array.
Simply define the audience areas and you can easily position the array, add or remove cabinets, and adjust its height, location and angle until you achieve the desired results in the simulation.
- Available in fully modular design enables cabinets to be easily configured as flown vertical arrays
- With a range of vertical and horizontal dispersion angles
- Highly configurable enclosures and ingenious hardware make it easy to custom design an array for every application
- Array modules are built around a high power 10" low frequency woofer coupled with either one or two neodymium high frequency compression drivers
- 22.5° cabinets are fixed curvature and must be tight pack arrayed
- Cabinets are self-powered with integral PF2-500R DSP and CobraNet enabled amp modules
- Available in 60°, 90° and 120° standard configurations, as well as with 60°/90° and 90/120° transitional WaveGuide options
- Applications:
- Live music, theater and performing arts
- Auditoriums and lecture theaters
- Mulipurpose spaces
- Sporting facilities
- Reverberant spaces
- Weather resistant outdoor applications
- Horizontal Symmetry - Yes
- Vertical Symmetry - Yes
- Warranty - Yes
- Loudspeaker Setup - Rigged
- Spec Sheet available - Yes
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 10 in
- Maximum Frequency Response (Bandwidth): 18 kHz
- Maximum Frequency Response (Bandwidth): 18000 Hz
- Minimum Frequency Response (Bandwidth): 80 Hz
- Minimum Frequency Response (Bandwidth): 0.08 kHz
- Construction: Multiply Birch
- Coverage Horizontal: 120 degrees
- Coverage Vertical: 22.50 degrees
- Depth: 14.89 in
- Height: 12.94 in
- Width: 24.35 in
- Net Weight: 63 lbs
- Warranty (Length/Type): Limited
- Sensitivity:
- VA101i-22/x-R: 1.0V for RPO
- VAX101i-22:
- LF 99dB (1W/1m)
- HF 104dB (1W/1m)
- Max SPL:
- VA101i-22/x-R: LF 126dB peak @ 1 meter
- VAX101i-22:
- LF 134dB peak @ 1 meter
- LF 140dB peak @ 1 meter (4 cabinets)
- HF 131dB peak @ 1 meter
- Horizontal Coverage:
- Model 22/6: 60°
- Model 22/9: 90°
- Model 22/12: 120°
- Model 22/69: 60° to 90°
- Model 22/912: 90° to 120°
- Power Rating:
- VA101i-22/x-R: See PF2-500R Internal Power Amplifier Specifications
- VAX101i-22:
- LF 250W AES @ 8 ohms (recommended amplifier power 625W @ 8 ohms)
- HF 50W AES @ 16 ohms (recommended amplifier power 125W @ 16 ohms)
- Transducers:
- LF: 10" Woofer SSL10-4
- HF: 1 x 1" exit, 1.75" VC, Compression Drivers SSD1750-TN-8
- Connectors:
- VA101i-22/x-R: See PF2-500R Internal Power Amplifier Specifications
- VAX101i-22: 2x NL4 Speakon (looping) LF 1+/1- HF 2+/2-, Barrier Strip
- Options: WR Weather Resistant Treatment
- Enclosure:
- 3/4" (19 mm) Multiply Birch Construction
- Perforated metal grille
- Finish:
- Black or White Paint as Standard
- Custom Color Paint available as cost option
- WEIGHT: 67 Lbs (30.4 kg) Net with MPS rigging connector
Suggested Products
Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/