Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
40W Stereo Audio Power Amplifier, 8ohms Output
Series:
Model: TX-PA40DE
- Stereo audio power amplifier
- Left and right unbalanced phono jack inputs
- Switch-selectable stereo or mono operation
- Studio quality, transparent compressor/limiter
- LED to indicate audio compression threshold
Product Info
Tech Specs
Related Products
Documents
40W stereo audio power amplifier with 2 unbalanced line level inputs on high-reliability gold plated phono (RCA) jacks. A front-panel recessed gain control trimmer permits setting the desired amplifier output level for each channel. The gain range accommodates the range of typical unbalanced audio signal levels. Each of the 2 outputs will drive a 4ohms or 8ohms speaker or multiple speakers connected to present a 4ohms or 8ohms load to the amplifier. The output impedance is switch-selectable on the front panel of the module.
- Stereo audio power amplifier
- Left and right unbalanced phono jack inputs
- Switch-selectable stereo or mono operation
- Studio quality, transparent compressor/limiter
- LED to indicate audio compression threshold
- Outputs drive 4 or 8ohms speaker
- High-efficiency class D operation
- Thermal and short-circuit protection
- Amplifier Signal Type - Audio
- Amplifier Type - Power Amplifier
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Shipping Weight: 0.40 lbs
- Noise: < -75 dB (Below 20Wrms)
- INPUT: Line level (-10dBV nominal unbalanced), left and right
- Input Impedance: 10 kohms (Unbalanced)
- Minimum Input Levels: -18 dBV (To cross compressor threshold)
- Maximum Input Levels: +15 dBV
- Frequency Response: 20Hz to 20kHz (at +/-1dB, 4 or 8ohms)
- Compressor: Threshold nominally 2dB below rated output, automatically adjusting attack and release times
- Crosstalk: Better than 60dB (1kHz, no compression)
- Output Power: 20Wrms into 8ohms per channel, 40Wrms total, 15Wrms into 4ohms per channel, 30Wrms total
- Power Requirement: Input 100 to 240Vac, 50 to 60Hz, 1.5A, IEC C14, Output to module 24Vdc
- Package dimensions: 5.125 X 2.5 X 5.8 in
Power Amplifier
878 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Code3AV Inc.
close
Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/
Contact in regards to this product:
Radio Design Labs
Model: TX-PA40DE
Request more information from a dealer near you
close
Request more information from a dealer near you