Signal Processing Systems : Audio Interfaces : RDL, Radio Design Labs - RU-BNF

All Products

Format-A Bi-directional Network Interface

Series: RACK-UP

Model: RU-BNF

Converts RDL Format-A and aux source to four dante network channels
Easy installation with format-A connections on RJ45 through CATx Cable
Format-A audio sources from pairs A, B and C converted to dante
Fourth dante audio channel fed from unbalanced or balanced aux line input
Front-panel gain adjustment with dual-LED VU meter for aux input

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The RU-BNF modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.

APPLICATION: The RU-BNF is an RDL Format-A sender/receiver that connects to a Dante-enabled network, providing all the features of an RDL RU-FN Format A to Network Interface and an RU-NFD Network to Format-A Interface/Distributor.

Network to Format-A Interface/Distributor Section

The RU-BNF converts three Dante audio channels to RDL Format-A. Each network channel corresponds to Pair A, B or C of the Format-A outputs. The unit converts a fourth Dante audio channel to a balanced line-level AUX output.

One front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location.

The Format-A output is distributed to three separate rear-panel RJ45 jacks. Each Format-A output jack provides up to 200 mA of power to connected Format-A receivers. Multiple receivers may be daisy chained from one output jack, or may be connected by home run to each of the three outputs. Higher current Format-A receivers, such as RDL D-PSP1A powered Decora-style speakers, are to be individually connected to a separate output jack.

The RU-BNF output jacks support the entire range of Format-A receivers, making each output pair available for end-user connection on various wall plates, or feeding other equipment using rack-mounted, shelf-mounted or utility Format-A receivers. The wide array of Format-A receivers provide compatibility with commercial audio equipment operating at standard professional levels. High resolution digital audio converters coupled with RDL’s renowned analog filters provide superior fidelity with a very low noise floor. Each Format-A receiver may be connected near the RU-NFD or up to several thousand feet distant.

Converts RDL Format-A and aux source to four dante network channels
Easy installation with format-A connections on RJ45 through CATx Cable
Format-A audio sources from pairs A, B and C converted to dante
Fourth dante audio channel fed from unbalanced or balanced aux line input
Front-panel gain adjustment with dual-LED VU meter for aux input
Signal LEDs indicate audio for each of the three audio source format-A pairs
Converts four dante network audio signals to RDL Format-A and Aux
Three Dante audio signals feed format-A output pairs A, B and C
Fourth Dante audio signal feeds auxiliary balanced +4 dBu line output
Format-A pairs are distributed to three separate format-A output jacks
Signal LEDs indicate audio for each of the four received dante audio signals
External 24 Vdc supply powers all connected format-a modules through RJ45 Jacks
PoE (RU-BNFP) powers format-A input and primary format-A output RJ45 Jacks
High Resolution 24 bit analog to digital and digital to analog conversion
Legendary RDL analog filtering enhances superb audio performance
LED indicators show network sync status
Normal or hot-standby operation from PoE (Model RU-BNFP)
Compatible with wide array of RDL Format-A Active and passive senders and receivers
Equipped for rack mounting or surface mounting

Audio Interface Type - Ethernet Audio
Dante Enabled - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: CE
Depth: 5.20 in
Height: 1.70 in
Shipping Depth (with packaging): 6 in
Shipping Height (with packaging): 2.63 in
Shipping Width (with packaging): 6 in
Width: 5.80 in
Product Weight: 1.46 lbs
Shipping Weight: 1.72 lbs
DC Voltage: 24 Volts
Network Connector: RJ45 with Link and Speed indicators
Digital Audio Ethernet Protocol: Dante
Transmission Rate: 100 Mbps
Sample Rates supported: 44.1 kHz, 48 kHz (default)
Bit Depth Supported: 24 bits
Audio Operating Levels: -18 dBFS = +4 dBu
Format-A to Network Interface Section:
- Format-A Input: RDL Format-A RJ45
- Format-A Signal Pairs Used (3): A, B, C
- Frequency Response: 20 Hz to 20 kHz (± 0.5 dB)
- THD+N: < 0.1%
- Noise below +4 dBu: < -75 dB
- CMRR: > 90 dB (50 to 120 Hz, any input pair)
- Crosstalk: < 80 dB (20 Hz to 20 kHz)
- Headroom above +4 dBu: > 18 dB
- AUX Input
  - Input: Balanced, detachable terminal block
  - Input Impedance: > 20 kohms
  - Input Level for +4 dBu: -16 dBu to +12 dBu, +22 dBu maximum
  - Frequency Response: 20 Hz to 20 kHz (± 0.75 dB)
  - THD+N: < 0.1%
  - Noise below +4 dBu/-18 dBFS: < -75 dB
  - CMRR: > 60 dB (50 to 120 Hz)
  - Crosstalk: < 80 dB (20 Hz to 20 kHz)
  - Headroom above +4 dBu: > 18 dB
Network to Format-A Interface/Distributor Section:

AV-LN4 - Line Level Audio to Network Interface

AV-NH1 - Network to Stereo Headphone Amplifier

AV-NL2 - Network to Audio Interface

AV-NL4 - Network to Audio Interface

AV-XMN4 - Microphone to Network Interface

D-TPS1A - Active Single Pair Sender Twisted Pair Format-A XLR Microphone Input with Phantom

D-TPS2A - Active Two Pair Sender Twisted Pair Format-A Stereo RCA Jack Inputs

D-TPS3A - Active Three Pair Sender Twisted Pair Format-A XLR Microphone & Stereo RCA In

D-TPS6A - Passive Single-Pair Sending Module

D-TPS7A - Passive Single-Pair Sender

D-TPS8A - Two-pair Audio Sender

D-TPSL1A - Active Single Twisted-pair Format-A Sender

D-TPSL2A - Active Two Twisted-pair Format-A Sender

DB-TPS1A - DB-TPS1A Active Single-Pair Sender - Twisted Pair Format-A - XLR microphone input with phantom

DB-TPS2A - DB-TPS2A Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

DB-TPS3A - DB-TPS3A Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA inputs

DB-TPS8A - Two-pair Audio Sender with Daisy-Chain

DB-TPSL1A - Active Single Twisted-Pair Sender

DB-TPSL2A - Active Twisted Two-Pair Format-A Sender

DD-BN22 - Wall-mounted Bi-directional Mic/Line Dante Network Interface

DD-BN2M - Wall-mounted Bi-directional Mic/Line Dante Audio Interface

DD-BN2ML - Wall-mounted Dante Audio Network Interface

DD-BN31 - 4x4 Wall-mounted Dante Audio Network Interface

DD-BN40 - 4x2 Wall-mounted Dante Audio Network Interface

DD-BTN44 - Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DDB-BN22 - 2x2 Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN2M - 2x2 Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN2ML - Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN31 - 4x4 Wall-mounted Bi-directional Mic/Line Dante Interface

DDB-BN40 - 4x2 Wall-mounted Bi-directional Mic/Line Dante Interface

DDB-BTN44 - Mini-Jack Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DDS-BN22 - 2x2 Wall-mounted Dante Audio Network Interface

DDS-BN2M - 2x2 100Mbps Wall-mounted Dante Audio Network Interface

DDS-BN2ML - 100Mbps Wall-mounted Dante Audio Network Interface

DDS-BN31 - 4x4 24-bit Wall-mounted Dante Audio Network Interface

DDS-BN40 - 4x2 24-bit Wall-mounted Dante Audio Network Interface

DDS-BTN44 - RCA Jack Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DS-TPS1A - Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic input w phantom

DS-TPS2A - Active Two-Pair Sender - Twisted Pair Format-A - Stainless - stereo phono jack inputs

DS-TPS3A - Active Three-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic & stereo phono in

DS-TPS6A - Passive Single-Pair Sender

DS-TPS7A - Passive Single-Pair Sender

DS-TPS8A - Two-pair Audio Sender with Jack Audio Input

DS-TPSL1A - Active Single Twisted-Pair Format-A Sender, Silver

DS-TPSL2A - Active Two Twisted-Pair Format-A Sender, Silver

DS-TPSM2A - 2-pair Audio Sending Module, Stainless Steel

FP-NML2 - Network to Mic/Line Interface

FP-NML2P - Network to Mic/Line Interface with PoE

FP-NML2V - Network to Mic/Line Interface with VCA

FP-NML2VP - Network to Mic/Line Interface with VCA, PoE

FP-TPS4A - FP-TPS4A Format-A Two-Pair Audio Sender

FP-TPSR4A - Format-A Two-Pair Audio Sender/Receiver

HR-RU1 - Mounting Adapter Kit for a RACK-UP Module

RU-BNFP - Format-A Bi-directional Network Interface with PoE

RU-FN - Format-A to Network Interface

RU-FNP - Format-A to Network Interface with PoE

RU-HRA1 - RU-HRA1 10.4" Rack Mount for 1 RACK-UP Series Product

RU-LB2 - Line-level Bi-directional Network Interface

RU-LB2P - Line-level Bi-directional Network Interface with PoE

RU-LB4 - Line-level Bi-directional Network Interface

RU-LB4P - Line-level Bi-directional Network Interface with PoE

RU-MLB2 - Mic/Line Bi-directional Network Interface

RU-MLB2P - Mic/Line Bi-directional Network Interface with PoE

RU-MLB4 - Mic/Line Bi-directional Network Interface

RU-MLB4P - Mic/Line Bi-directional Network Interface with PoE

RU-NFD - Network to Format-A Interface/Distributor

RU-NFDP - Network to Format-A Interface/Distributor with PoE

RU-NL2 - Network to Line Level Interface

RU-NL2P - Network to Line Level Interface with PoE

RU-NL4 - Network to Line Level Interface

RU-NL4P - Network to Line Level Interface with PoE

RU-TPDA - Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

RU-TPS4A - Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

RU-VCA6A - RU-VCA6ADigitally Controlled Attenuators

SF-BNC2 - Bidirectional Unbalanced Stereo Audio Network Interface

SF-DN4 - Digital Audio to Network Interface

SF-ND2 - Network to Digital Audio Interface

SF-NH1 - Network to Stereo Headphone Amplifier

SF-NL2 - Network to Audio Interface

SF-NP35E - PoE++ Network to 35W Mono Audio Amplifier - 70V or 100V

SF-NP50A - Network to 50W Mono Audio Amplifier - 70V or 100V

SF-UN1 - USB to Dante Network Interface

SF-XMN4 - Microphone to Network Interface

ST-LEQ1 - Loudness Equalizer - Use with VCA

ST-VCA3 - Voltage Controlled Amplifier

TX-TPS1A - Active Single-Pair Sender, Twisted Pair Format-A

TX-TPS3A - Active Three-Pair Sender, Twisted Pair Format-A

TX-TPS6A - Passive Single-Pair Sender, Twisted Pair Format-A

RDL_Format-a_Dante_Intro.pdf 1713 kb - Other

Project List

RDL_Dante_Intro.pdf 3030 kb - Other

Project List

Interface 1260 kb - Data Sheet

Project List

RU-BR1
Mounting Bracket for RACK-UP Series

RU-SMA1
RACK-UP Mounting Plate - mounts any RACK-UP module in a cabinet or other flat surface

Suggested Products

OMNEO Interface

by Bosch Conferencing and Public Address Systems

1 x RSA Power Supply, 2 x Powered 5V USB Supply

by Alfatron Electronics, Inc.

Flush Audio Interface

by Bosch Conferencing and Public Address Systems