Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers

Request Quote
All Products
D-RC2ST 2 Channel Remote Control for STICK-ON - Remote selection of audio or video sources
Series:
Model: D-RC2ST
- Remote Selection of 2 Audio Sources, Destinations or Functions
- Single-Button Selection for Each Source
- Open-collector Switching of 1 of 2 Module Functions
- 3-wire or 4-wire Remote Wiring
- Professional Aesthetic Appearance
Product Info
Tech Specs
Documents
The front panel of the D-RC2ST features two pushbuttons with two associated LEDs. Upon initial power-up, source 1 is selected. Touching the other button de-selects source 1 and immediately selects source 2. An LED adjacent to each button shows which source is selected.
In a typical installation, the D-RC2ST may be used to select between two audio or video sources, or to route audio to two destinations. To select between two audio sources, the D-RC2ST is connected to an RDL ST-SSR1 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. For audio routing, an RDL ST-RX2 is used. In each of the above examples, only one output terminal is needed for triggering. Therefore a single shielded pair (or 3-conductor cable) is required for remote connection. For more complex switching networks, both outputs may be used.
In installations where ULTRASTYLE™ wall controls are preferred, use the RUC-4 Universal Remote Control.
- Remote Selection of 2 Audio Sources, Destinations or Functions
- Single-Button Selection for Each Source
- Open-collector Switching of 1 of 2 Module Functions
- 3-wire or 4-wire Remote Wiring
- Professional Aesthetic Appearance
- Companion to other RDL® Remote Controls
- Spec Sheet available - Yes
- Selectors (2):: Momentary pushbuttons, (1 for each channel)
- Indicators (2):: Red LEDs, (indicates channel selected)
- Connections:: Detachable terminal block; Power input; open-collector outputs (25 mA current limited)
- Ambient Operating Environment:: 0° C to 55° C
- Power Requirement:: GROUND-REFERENCED, 24 Vdc @ 30 mA
- Mounting:: Mounts in standard US electrical box, RDL WB- or SMB- series boxes; cover plate available separately
- Package Type:: Cardboard Box
- Package Dimensions:: 3.625 x 4.625 x 2.125 in.
- Shipping Weight:: .365 lbs.
- WEEE weight:: 0.215 lbs.
- Tariff code:: 8517.62.0050
db-rc2st[1]1.pdf
1146 kb
- Data Sheet
Request Quote
Suggested Products
by
Alfatron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact Code3AV Inc.
close

Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/
Contact in regards to this product:
Radio Design Labs
Model: D-RC2ST
Request more information from a dealer near you
close
Request more information from a dealer near you