Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Signal Processing Systems : Receivers & Transmitters : Listen Technologies Corporation - LT-800-216-01
Request Quote
All Products
Stationary RF Transmitter (216 MHz)
Series: FM
Model: LT-800-216-01
- Highlights
- Superior Audio Quality
- Long transmission range
- Designed for installation
- Advanced audio processing
Product Info
Tech Specs
Related Products
Documents
Accessories
Thanks to its outstanding audio quality, the Listen LT-800 Stationary Transmitter can be used in a variety of applications. The LT-800 is connected to your main audio system, broadcasting a high quality audio signal to belt pack receivers, stationary receivers, or wireless speaker / receivers. The end result - your audience can hear and understand the presentation better because of improved speaker placement or because they have their own belt pack and headset. The signature Look & Listen LCD shows channel, lock, programming and RF power.
Includes
LT-800 Stationary Transmitter
LA-207 12 VDC Replacement Power Supply for LT-800
Quick reference card
- Highlights
- Superior Audio Quality
- Long transmission range
- Designed for installation
- Advanced audio processing
- Limited Lifetime Warranty
- Wireless Receiver Transmission - RF
- Wireless - Yes
- Spec Sheet available - Yes
- RF Frequency Range 216MHz: 216.0125 - 2169875 MHz
- Number of Channels: 57
- Frequency Accuracy: ± .005 % stability 0 to 50 degrees C (32 to 122 degrees F)
- Transmitter Stability: 50 ppm
- Transmitter Range 216MHz: 3,000(914) feet (m)
- Output Power 216MHz: 100 mW max allowed by FCC
- Antenna: Several available. See www.ListenTech.com for details
- Antenna Connector: Reverse BNC
- Compliance: FCC Part 90, Industry Canada
- System Frequency Response 216MHz: 50 - 10 kHz (±3dB). All system specifications are end-to-end .
- System Signal to Noise Ratio 216MHz: 80 dB SQ enabled, A-weighted. SQ disabled: 50dB in 216MHz. All system specifications are end-to-end .
- System Distortion: <2 % Total harmonic distortion (THD) at 80% deviation. All system specifications are end-to-end
- Audio Input 1 Connector: Rear panel. Female–XLR and ¼ in combo connector, balanced.
- Audio Input 1 Nominal Input Level: -55/0 dBu Rear panel. Female–XLR and ¼ in combo connector, balanced, -55/0dBu (mic/line) nominal input level adjustable, -30/+21dBu (mic/line) maximum, impedance 1k/20k Ohms (line/mic)
- Audio Input 1 Maximum Input Level: -30/+21 dBu Mic/line, adjustable
- Audio Input 1 Impedance: 1/20 k ohms Line/mic
- Audio Input 2 Connector: Rear panel. One Phono connector, unbalanced.
- Audio Input 2 Nominal Input Level: 10/+10 dBu Line/speaker, adjustable
- Audio Input 2 Maximum Input Level: 30 dBu
- Audio Input 2 Impedance: 100 k ohms
- Combined Audio Output (Mix) Connector: Rear panel. One Phono connector, unbalanced.
- Combined Audio Output (Mix) Nominal Input Level: 0 dBu
- Combined Audio Output (Mix) Maximum Input Level: +19 dBu
- Combined Audio Output (Mix) Impedance Level: 10 ohms
- Headphone Output Connector: Front panel. One 3.5mm connector.
- Headphone Output Maximum Output Level: +14 / 250 dBU / mW Unbalanced, adjustable output level.
- Headphone Output Impedance: 32 ohms
- RF Power Selection: Rear panel. Full, ½, ¼ (see "Output Power" above).
- Set-up Controls: Front Panel. Input level, mix level (modulation), contour equalization
- User Controls: RF power, test tone, channel UP and DOWN, Input 1: line or mic level, Input 2: speaker or line level.
- Programming: Channel selection can be locked by holding the UP and DOWN button 5 seconds.
- Input VU Meter: Dual Ten step LED (eight green, two red)
- Mix VU Meter: Ten step LED (eight green, two red)
- RF Power: Four step green LED
- Power: Green LED illuminates when the unit is powered up
- LCD Display: Channel and lock status
- Test Tone: Red LED illuminates when test tone enabled
- Power Supply Type: In-line power supply, Listen part number LA-201
- Power Supply Input: 120 / 60 / 19 VAC / Hz / Watts Maximum continuous
- Power Supply Output: 15 / 1 VAC / A
- Power supply connector: .02 x .01 (5.0 x 2.5) in (mm) OD x ID, barrel type
- Compliance: UL Listed
- Dimensions: 8.0 x 8.0 x 7.75 (20.3 x 20.0 x 4.45) in (cm) Width by depth by height
- Unit Weight: 3.0 (1.4) lbs (kg)
- Unit Weight with LA-201 Power Supply: 4.4 (2.0) lbs (kg)
- Shipping Weight: 5.0 (2.3) lbs (kg)
- Rack Mounting: 1/2 rack unit (RU) Rack mounting kit available (LA-326)
- Temperature - Operation: -10 to 40 (14 to 104) degrees C (degrees F)
- Temperature - Storage: -20 to 50 (-4 to 122)
- Humidity: 0 to 95 % Relative humidity, non-condensing
- Depth: 7.70 in
- Height: 8 in
- Width: 8 in
- Shipping Weight: 5 lbs
LA-102
- Telescoping Top Mounted Antenna (216 MHz)
LA-107
- Ground Plane Remote Antenna (216 MHz)
LA-112
- RG-58 50 Ohm Coaxial Cable (Per ft.)
LA-113
- RG-8 50 Ohm Low-Loss Coaxial Cable (Per ft.)
LA-117
- Coaxial Dipole Remote Antenna (216 MHz)
LA-122
- Universal Antenna Kit (72 and 216 MHz)
LA-124
- 90° Helical Antenna (216 MHz)
LA-126
- Antenna Kit for Rack Mount (216 MHz)
LA-127
- RG-58 BNC Connector
LA-128
- RG-8 BNC Connector
LR-100-216
- Stationary RF Receiver/Power Amplifier (216 MHz)
LR-400-216
- Portable Display RF Receiver (216 MHz)
LT-800 Stationary FM Transmitter Data Sheet
1139 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Code3AV Inc.
close
Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/
Contact in regards to this product:
Listen Technologies Corp.
Model: LT-800-216-01
Request more information from a dealer near you
close
Request more information from a dealer near you