




AVX (Non-switchable) HDMI 2.0 Receiver
Model: HDMI-TPX-RX109AU2K
Part #: 91580013
- USB2.0 transmission with support for USB2.0 devices e.g. cameras, microphones, touch screens, pen drives, keyboard and mouse
- Can send or receive remote power through CATx cable (PoE PSE, PoE PD)
- Allows for the transmission of HDMI 2.0, embedded audio, Ethernet, RS-232 and USB2.0 between an extender pair directly connected together
- Command injection on RS-232 ports
- Ethernet extension (1 Gbps)
The HDMI-TPX-TX209AU2K and HDMI-TPX-RX109AU2K transmitter and receiver devices are based on SDVoE technology and allow users to extend HDMI 2.0 compliant video, audio and control signals from a single source to a single destination when they are directly connected. Moreover, these USB2.0 capable extenders also allow transparent and composite USB2.0 transmission in the opposite direction.
Beyond the benefits of sending high-resolution video and USB2.0 data over long distances, the extenders are also able to handle various connectivity standards, including a 1G user Ethernet channel over the 10G link, as well as command injection into RS-232.
The Gigabit Ethernet ports are also valuable additions, allowing users to connect Ethernet capable devices to the network directly through the TPX extenders. This is particularly useful for controlling external devices like projectors and displays.
HDCP 2.3 and basic EDID management functionality are also among the features offered by these devices, such as their connectivity and easy integration into a wide range of AV operations and with 3rd party devices, such as the Christie Terra projector.
Composite USB2.0 transmission adds the ability to connect remote USB-HID devices to a host computer through an extender pair. Transparent USB2.0, on the other hand, provides support for any type of USB2.0 devices like webcams, microphones, touch displays just to name a few.
- USB2.0 transmission with support for USB2.0 devices e.g. cameras, microphones, touch screens, pen drives, keyboard and mouse
- Can send or receive remote power through CATx cable (PoE PSE, PoE PD)
- Allows for the transmission of HDMI 2.0, embedded audio, Ethernet, RS-232 and USB2.0 between an extender pair directly connected together
- Command injection on RS-232 ports
- Ethernet extension (1 Gbps)
- Supports HDMI 4K signal formats (4K UHD at 60Hz RGB 4:4:4, up to 18 Gbps)
- HDR and Low Latency Dolby Vision support
- HDCP 2.3 compliant
- Ability to turn off USB VBUS power remotely
- Compatible with third-party SDVoE devices and controllers
- Receiver/Transmitter Format Type - HDMI
- ROHS Compliant - Yes
- Warranty - Yes
- Cooling: passive
- Depth: 5.98 in
- Height: 1.02 in
- Operating Humidity: 10% to 90%, non-condensing
- Storage Temperature: -30° to +80°C (-22° to +176°F)
- Width: 3.95 in
- Enclosure Material: 1 mm steel
- DC Voltage: 48 Volts
- Power over Ethernet (POE): via TPN input (IEEE802.3af) (can receive power)
- Color: Black
- Warranty (Length/Type): 3 Years
- Certifications: IEC/EN/UL/CSA, CE
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 0.83 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Video Outputs:
•HDMI output Connector type: 19-pole HDMI Type A receptacle
•A/V standard: DVI 1.0, HDMI 1.4, HDMI 2.0
•HDCP compliance: HDCP 2.3
•Color space: RGB, YCbCr
•Supported resolutions at 8 bits/color: up to 4096x2048 at 60Hz (4:4:4); up to 3840x2160 at 60Hz (4:4:4); 4096x2048 at 60Hz (4:2:2) up to 10 bits/color
•Audio formats: All HDMI 2.0 formats including multi-channel PCM, Dolby True-HD and DTS-HD master audio - ANALOG AUDIO OUTPUT:
•Connector type: 5-pole Phoenix connector
•Audio formats: 2-ch PCM
•Sampling frequency: 48 kHz
•Volume: -78 dB - 0 dB
•Balance: 0 - 100 (50 = center)
•Nominal Differential Output Level at 0 dB Gain: +4 dBu
•Nominal Differential Output Level at 3 dB Gain: +7 dBu - USB port:
•Connector type: 2x USB-A female (device, composite mode)
•USB compliance: USB2.0
•Device class: HID
•Powering: Max 0.325A at 5V (total)
•USB port:
•Connector type: 4x USB-A female (device, transparent mode)
•USB compliance: USB2.0
•Device class: Audio, Video, Mass Storage, HID, HUB, Smart Card, Vendor specific
•Powering: Max 1.08A at 5V (per port), Max 1.75A at 5V (total) - Power supply option: Power adaptor/PoE
- AC power plug: Interchangable (EU, UK, JP/US, AUS/NZ)
- DC power plug: Locking DC connector (2.1/5.5 mm pin)
- Control Ports:
•RS-232 serial port:
•Connector type: 3-pole Phoenix connector
•Baud rates: Between 4800 and 115200 Baud
•Data bits: 8 or 9
•Parity: None/Odd/Even
•Stop bits: 1/1.5/2
•Ethernet port:
•Connector type: RJ45 female connector (2)
•Ethernet data rate: 10/100/1000Base-T, full duplex with autodetect - TPN input:
•Connector type: RJ45 connector
•Power over Ethernet (PoE): IEEE 802.3af (PD)
•Compliance: SDVoE
•HDCP compliance: HDCP2.3
•Transferred signals: Video, Audio, RS-232, Infrared, Ethernet
•Color space: RGB, YCbCr
•Video delay: 0 frame
•Supported resolutions at 8 bits/color: up to 4096x2048 at 60Hz (4:4:4); up to 3840x2160 at 60Hz (4:4:4); 4096x2048 at 60Hz (4:2:2) up to 10 bits/color
•Audio formats: All HDMI 2.0 formats including multi-channel PCM, Dolby True-HD and DTS-HD master audio

Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/