Floorplate AV Over IP Scaling Multimedia Extender with USB K+M and PoE support
Model: FP-VINX-110P-HDMI-ENC-MKS
Part #: 91810027
- Passive, noiseless cooling
- Compact and silent design in 2-gang form factor suitable for wall, floorbox and lectern mounting
- Fits in 2-gang form factor Carlon boxes suitable for wall, floorbox and lectern mounting
- Can be remote powered through CATx cable (PoE PD)
- 1920x1080 at 120Hz/4:4:4, 4096x2160 at 30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
The operation of FP-VINX-110P-HDMI-ENC and VINX decoders can be expanded from a simple point-to-point application to unlimited endpoints for the ultimate in virtual matrix switching, digital signage and signal extension. The extenders include our Advanced EDID Management system and decoders are capable of scaling the video signal up to the maximum supported resolution of 4K UHD @ 30 Hz. The built-in USB ports support KVM function and can also handle USB 2.0 mass storage. The units are HDCP compliant.
One of the most popular of the unique features of VINX is the Video Wall setup, reducing the time needed to install a video wall to a fraction of the time needed with other systems. The feature options include gap and bezel adjustment, which can be performed in batch.
SILENT OPERATION
The efficient design of all VINX models including the wallplate FP-VINX-110P-HDMI-ENC allows passive, fanless cooling. Unlike other third party models in this product category, VINX has noiseless operation, fitting even the most silent application environments.
BUILT-IN CROSSPOINT VIEW
VINX series also features crosspoint view: available in both the free Lightware Device Controller (LDC) management software and the built-in web in the devices, the crosspoint view shows the available input and output ports of all connected encoder and decoder units, and allows switching the signals across them. The signal can also be switched to a video wall output assembled from several VINX units and acting as a single display sink. A special keyboard combination can be linked with various sources to switch signals.
SMART BANDWIDTH MANAGEMENT
The built-in, selectable Video and Graphic Modes optimize streaming and compression to match the transferred media. The Variable Bitrate feature provides an even more accurate adjustment option for smart bandwidth management, adjustable between 10 Mbps and 800 Mbps.
REMOTE POWERING
When connected to a Power-over-Ethernet (PoE) capable switch, there is no need for installing and connecting a local power supply to power the FP-VINX-110P-HDMI-ENC. Hence valuable space can be conserved which is a major advantage in wallplate applications.
- Passive, noiseless cooling
- Compact and silent design in 2-gang form factor suitable for wall, floorbox and lectern mounting
- Fits in 2-gang form factor Carlon boxes suitable for wall, floorbox and lectern mounting
- Can be remote powered through CATx cable (PoE PD)
- 1920x1080 at 120Hz/4:4:4, 4096x2160 at 30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- HDMI 1.4 and DVI 1.0 compliant
- USB 1.1 K+M (HID) extension
- USB 2.0 MSC (Mass Storage Class) extension
- Designed to be used with 90 degree angled HDMI cables
- Advanced EDID Management
- Intuitive control software for device configuration
- Device control via Ethernet (TCP/IP)
- Built-in website for device configuration
- Firmware upgrade through Ethernet
- HDCP 2.2 and HDCP 1.4 compliant
- Status LED for video signal detection
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- Extender Type - HDMI
- Warranty - Yes
- Spec Sheet available - Yes
- Depth: 1.73 in
- Height: 3.30 in
- Width: 4.58 in
- Enclosure Material: 1,5 mm steel
- Compliance: 1000Base-T (IEEE 802.3ab)
- Audio Formats: All HDMI2.0 audio formats
- Video Delay: 2,2 frames (end-to-end)
- Ethernet Data Rate: 10/100/1000Base-T, full duplex with autodetect
- Color Space: RGB, YCbCr
- Power over Ethernet (POE): Yes, (IEEE 802.3af)
- HDCP Compliance: HDCP 1.4
- EDID Memory: 80 factory presets, 5 programmable
- EDID emulation: Yes, advanced EDID management
- USB COMPLIANCE: USB 2.0
- Warranty (Length/Type): 3 Years
- Transferred signals: Video, Audio, RS-232, Infrared, Ethernet, USB
- Supported resolutions at 8 bits/color: up to 4096x2048 at 30Hz (4:4:4) or 4096x2048 at 60Hz (4:2:0) up to 3840x2160 at 30Hz (4:4:4) or 3840x2160 at 60Hz (4:2:0) 1920x1080 at 60Hz (4:4:4) up to 12 bits/color
- Supported standard: EDID v1.3
- Device class: HID / Mass storage
- Ethernet Connector type: RJ45 female connector
- USB port Connector type: B-type receptacle
Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/