Gb SFP to 2xRJ45 Media Converter with PoE+
Model: SSF-SFP-RJ452POE-1G
- 2x10/100/1000Base-T to 100/1000Base-X SFP Converter
- DIP settings for fiber speed, LFP functions and PoE type
- Forward 2048 bytes (Max.) packets in switch mode
- Forward 9Kbytes Jumbo packets in transparent converter mode
- Port isolation available for the two RJ45 ports
Easily convert between fiber and Ethernet with the SSF-SFP-RJ452POE-1G! The unit includes two RJ45 ports with one open SFP slot (SFPs sold separately). An external power supply with AC adapter is also included.
This Gigabit Ethernet 10/100/1000Base-T to 2x 100/1000Base-X non-managed stand-alone media converter provides PoE+ (30W PSE). The unit’s DIP switches provide flexibility in configuration. The SSF-SFP-RJ452POE-1G’s single SFP slot allows both Gigabit and Fast Ethernet operation. All SFP types are accepted, including multimode, single mode, CWDM, DWDM, or BiDi. BiDi allows bi-directional transmission over a single strand of fiber.
Fiber port speed, LFP function, or transparent or switching converter mode can be adjusted via DIP sw.
Power status, UTP and FX port speed and the link status of each port are indicated by LED lights.
The converter also provides Auto-Negotiation & Auto MDI/MDI-X.
- 2x10/100/1000Base-T to 100/1000Base-X SFP Converter
- DIP settings for fiber speed, LFP functions and PoE type
- Forward 2048 bytes (Max.) packets in switch mode
- Forward 9Kbytes Jumbo packets in transparent converter mode
- Port isolation available for the two RJ45 ports
- Auto-Negotiation and Auto MDI/MDI-X
- Supports Q in Q double tagged frame transparent
- Supports IEEE 802.1Q Tag VLAN pass thru
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Certifications: CE, FCC
- OPTICAL INTERFACE:
•Connector: SFP slot
•Data Rate: 1.25G (GE) or 155M (FE)
•Duplex Mode: Full duplex
•Fiber:MM 50/125um, 62.5/125um SM 9/125um
•Distance: Depending on SFP used
•Wavelength: Depending on SFP used, MM 1310nm, SM 1310, 1550nm, WDM 1310Tx/1550Rx (Type A), WDM 1550Tx/1310Rx (Type B) - STANDARDS AND POWER:
•Standards: IEEE 802.3, 802.3u, 802.3Z, 802.3ab
•Indications: LED (Power, FX Link, SPD, TP Link)
•Power Input: Separate AC Adapter 90-240VAC to DC52V at 1.25A
•PoE Specs: 52VDC voltage output, short and overload protection, Pin polarity 1/2 (V+), 3/6 (V-); IEEE 802.3at
•Power Consumption: < 5W with no PSE, 60W at max load PoE+ (802.3at)
•MTBF: 65,000 hrs - ELECTRICAL INTERFACE:
•Connector: RJ45
•Data Rate: 10Mbps, 100Mbps, 1000Mbps
•Duplex mode: Full duplex
•Cable: 100Base-TX Cat .5, 5e or higher, 1000Base-T Cat.5, 5e or higher - OPERATION AND DETAILS:
•Operating Humidity: 10 ~ 90% non-condensing
•Storage Temperature: -20 ~ 85°C
•Dimensions: 94 x 71 x 26 mm w/o AC adapter (no SFP transceiver), 120 x 55 x 34 mm for standalone AC adapter only
•Weight : Adapter : 205g, Converter : 200g
Suggested Products
Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/