MXNet Evolution II 1G Encoder/Transmitting Device
Model: AC-MXNET-1G-EV2
- HDMI 2.0
- 18Gbps Bandwidth Support
- HDCP 2.3 (and all earlier versions supported)
- Evolution II ASIC with improved encoding engine
- With “lossy” signals, JPEG 2000 optimizes compression efficiency
The AC-MXNET-1G-EV2 represents the next step forward on the evolutionary path of the MXNet Platform encompassing an industry-first, holistically integrated approach to AV over IP video distribution from a solo manufacturer. AVPro Edge’s exclusive MXNet Platform offers the only proprietary, hyper-optimized AV over IP ecosystem of network-based encoders, decoders and managed switches guided from a centralized control unit by MXNet Mentor, our in-house engineered setup and system utilities management software solution.
AC-MXNET-1G-EV2, an Evolution II Encoding / Transmitting device, incorporates a newly designed AVPro Edge application-specific integrated circuit (ASIC) that introduces an improved software-based video encoding / decoding engine into the IC for enhanced video processing. Refinements to the IC include native support for 4K/60fps 4:4:4 signals (RGB and YCbCr @10- and 12-bit), plus extended audio capabilities to support high bitrate multi-channel formats, including Dolby Atmos and DTS:X for IMAX Enhanced soundtracks. All MXNet first-generation encoder features are retained for use with the AC-MXNET-1G-EV2.
As a member of the AVPro Edge family of AV over IP products, an AC-MXNET-1G-EV2 is the gateway where a signal enters the MXNet Ecosystem, connected with category cable (AVPro Edge strongly encourages CAT-6a infrastructure for all MXNet system deployments however for MXNet 1G, Cat-5e will comfortably transport MXNet 1G data signals) or fiber optic cabling, to an MXNet switch or any compatible multicast-capable managed L3 network switch.
A connected HDMI source will have audio and video signals encoded into a multicast data format for routing to any AC-MXNET-1D-EV2 system endpoint connected to the same MXNet switch. Encoded HDMI source signals up to native 4K/60fps 4:4:4 with Dolby Vision, HDR10, HDR10+ and HLG are passed to EVO II downstream AC-MXNET-1G-DV2 decoders, with RS-232 serial pass-through, IR control or USB signals also transportable inside encoded data packets.
Encoding is executed using an optimized JPEG 2000 codec, which parses data at managed flexible rates to minimize bitrate errors (200Mbps for 1080p content, 300Mbps for 4K/30fps content, peaking at 850Mbps for 4K/60fps content). Frame-syncing Genlock is supported, with latency near-zero and visually imperceptible. The AC-MXNET-1G-EV2 runs quietly and remains cool during operation, utilizing a fan-less design featuring chip-top heatsinking to efficiently disperse heat while limiting power consumption at typically 7 watts or less for stability and device longevity.
- HDMI 2.0
- 18Gbps Bandwidth Support
- HDCP 2.3 (and all earlier versions supported)
- Evolution II ASIC with improved encoding engine
- With “lossy” signals, JPEG 2000 optimizes compression efficiency
- Proprietary MXNet Mentor interface for bandwidth management, real-time status feedback, live diagnostics plus EDID copy and configuration
- Encodes native 4K/60fps 4:4:4 RGB or YCbCr with dynamic metadata support
- High Bitrate multi-channel support for Dolby Atmos and DTS:X
- Downstream decoders now support ARC and eArc
- Genlock frame-syncing ensures video walls are free from image-tearing
- Near-zero latency, visually imperceptible
- Configure control signal routing for RS-232, IR or USB via MXNet Mentor
- USB/KVM support with USB 2.0 Type-B female Host connection
- Improved USB 2.0 video processing for resolutions up to 1920x1080p @ 30Hz
- Built-in OLED data window provides localized device information at a glance
- Backed by AVPro Edge’s 10-year, no-hassle warranty
- Includes:
- AC-MXNET-1G-EV2 (Encoder/Transmitter Device)
- 1 x IR Emitter
- 1 x IR Receiver
- 2 x Mounting Brackets
- 4 x Screws for Mounting Brackets
- 2 x 3-Pin Terminal Blocks
- Decoder or Encoder Signal Type - Audio
- Decoder or Encoder Signal Type - Video
- IP Signals Supported - Yes
- Rackmountable - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 123.80 F
- Operating Temperature (Minimum): 23 F
- Certifications: CE/FCC/UL
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 120 Volts
- Active Power: 6.50 Watt
- Current Draw: 2 Amps
- DC Voltage: 12 Volts
- Depth: 4.74 in
- Height: 0.79 in
- Shipping Depth (with packaging): 2.13 in
- Shipping Height (with packaging): 7.09 in
- Shipping Width (with packaging): 12.20 in
- Width: 7.87 in
- Product Weight: 1.20 lbs
- Shipping Weight: 1.70 lbs
- Warranty (Length/Type): 10 Years
- Signal Type: DVI 1.0, HDMI 2.0b
- Video Resolution: 720P at 50/60Hz; 1080P at 50/60Hz; 4K at 50/60HZ 4:4:4*; 4K at 30HZ 4:4:4; 4K at 60HZ 4:2:0; 4K at 24HZ 4:2:0/4:2:2 [Ultrawide Support]
- HDR Format: HDR 10, HLG, Dolby Vision at 30Hz
- CHROMA SUBSAMPLING: 4:4:4, 4:2:2, 4:2:0
- Bit Depth per Color: 1080P (16Bit), 4k (10, 12 Bit)
- Visually Lossless: 4096x2160P at 60Hz (8 BIT) 4:4:4 or RGB; 3840x2160P at 60HZ (12BIT) 4:2:2 DOLBY VISION; 3840x 2160P at 60HZ (10BIT) 4:2:2 HDR10/HLG; 1920x1080P at 60HZ (12BIT)
- Audio Format (end to end): PCM 2, 5.1, 7.1 Channel, Dolby Digital, 5.1 Channel, Dolby Digital Plus, DTS, 5.1 Channel, DTS-ES, DTS-HD High Resolution, DTS-HD Master Audio, Dolby Atmos
- Audio Format (HDMI Loopout): Same as End to End
- Embedded Audio: Stereo Analog Audio
- De-Embedded Audio: Stereo Analog Audio
- Ethernet: (1) × female RJ-45, PoE
- SFP: (1) × SFP Slot
- HDMI: (2) × HDMI Type A 19-pin, female, one; HDMI input, one HDMI loop out
- Audio: (1) × 5 Pin Terminal Block, Balanced L/R
- Audio Out: (1) × 3.5 mm mini stereo jack, Audio in
- IR: (3) × 3.5mm mini-stereo jack, one IR-Pass, one IR-EYE, one IR-out
- RS232: (1) × 5 Pin Terminal Block
- USB: (1) × USB 2.0 Type-B for USB extension and KVM, (1) × USB Micro Type-B for MXNET service
- SFP and Fiber: 1000BASE-SX SFP Transceiver Module (MMF, 850nm, 550m, LC, DOM); 1000BASE-LX/LH SFP 1310nm 10km Transceiver Module
- Storage Temperature: -4 to 140°F (-20 to 60°C)
- Operating Humidity: 5-90% RH (No Condensation)
Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/