Dante | AES67 Microphone Interface
Model: DN4
- Compatible with all Audix RJ45-equipped, single-element, analog microphones
- High-fidelity 24-bit, 48kHz audio
- Balanced audio inputs with RFI filtering
- 48V phantom power output
- Each channel has eight selectable pre-amp gain levels, as well as low- and high-pass filters
The DN4 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost.
The DN4 features four inputs for Audix RJ45-equipped, single-element microphones and two 5V logic outputs per port, with source/sink capability for LEDs that are controlled by network-connected DSPs and one logic input per port for buttons. Low-pass and high-pass filter settings are available on each audio channel, as are eight selectable gain levels, with all settings configurable via software.
- Compatible with all Audix RJ45-equipped, single-element, analog microphones
- High-fidelity 24-bit, 48kHz audio
- Balanced audio inputs with RFI filtering
- 48V phantom power output
- Each channel has eight selectable pre-amp gain levels, as well as low- and high-pass filters
- All channels controlled independently
- Flash memory prevents loss of settings in the event of power loss
- Supports AES67 audio streams
- Dante Domain Manager (DDM) ready
- Dynamic or static IP address
- Evaluated to the requirement of UL2043 and is suitable for use in above-ceiling applications
- Operates on PoE from any IEEE 802.3af compliant equipment
- Applications:
- Meeting rooms
- Convention centers
- Educational facilities
- Houses of worship
- Dante Enabled - Yes
- ROHS Compliant - Yes
- Spec Sheet available - Yes
- Depth: 4.92 in
- Height: 1.11 in
- Width: 7.95 in
- DC Voltage: 48 Volts
- Product Weight: 1.41 lbs
- Certifications: FCC, CE, WEEE
- Minimum Frequency Response (Bandwidth): 15 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Maximum Frequency Response (Bandwidth): 22000 Hz
- Maximum Frequency Response (Bandwidth): 22 kHz
- Signal to Noise Ratio: -96 dB
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 50 F
- Frequency Response: 15Hz - 22kHz, +0, -3dB
- Sample Rate: 48kHz
- Phantom Power: 48VDC, 14mA / port (short circuit protected)
- Mic Input: Balanced, RFI filtered
- Input Impedance (Balanced): 1.15kohm
- THD+N: (1kHz, 0dB gain) 0.003percent
- Mic Input Connector: Shielded 8P8C, RJ45
- Max Input: (0dB gain) -14dBu, 155mV
- Word Width: 24-bit
- CMRR (typ.): 50dB
- EIN (typ., unweighted): -120dBu
- SNR (typ., unweighted): -96dB
- Channel Crosstalk(1kHz): < -80dB
- Dante™ / AES67 Channels: 4
- Dante™ Chipset: UXT-01-004
- Logic Inputs Per Port: 1 per single-element microphone port
- Logic Outputs Per Port: 2
- Low-pass Options: Off, 5kHz, 7kHz, 10kHz
- High-pass Options: 15Hz, 238Hz
- Gain Options: 0dB, +8dB, +12dB, +15dB,+18dB, +24dB, 30dB,+36dB
- External DC Jack: +48VDC, 125mA
- PoE (IEEE 802.3af): CLASS 2 (3.84 - 6.49W)
Suggested Products
Code3AV Inc.
14201 Justice Rd
Suite B
Midlothian, VA 23113
USA
(804) 223-2990
https://www.code3av.com/